Quick Tool PCB Support Pin System 55 mm 533 mm (21")

Part No.: QT-55-21

Category: PCB Support Systems

SMT Tooling Quick-Tool

ESD protective tips have compliant flange to prevent damage to delecate components.

Support pin locking mechanism is isolated from pin shafts to prevent lubricants from contaminating pins and eliminates sticking pins.

High grade, polished stainless steel support pins are made to last forever.

Add and remove modules with no air flow adjustments - set it and forget it.

Pins are capable of higher upward pin force to flatten warped PCBs.

Larger tips to reduce pressure points.

Higher pin mass for reliable reset function.

Increased pin holding force prevents slippage.

Height
length

Description & Technical data

Quik-tool - The SMT Standard

for Automatic PCB Support

Whether in the stencil printer, the SMD assembly machine, or in SPI and AOI, the new Quik-tool™ is ready to support your single-sided or double-sided assembled PCBs quickly, safely, and fully within the shortest time possible. This is achieved fully automatically with every new PCB. As a result, print quality is consistently improved, and vibrations of the PCB are reliably avoided. This means higher quality, reliability, and repeatability for you, as well as an increase in line throughput by minimizing machine downtime.

Quik-tool - Advantages at a Glance

OPTIFLOW: Automatic air flow regulation without any readjustment by the operator during product changes with varying numbers of modules.
Standard High Density (HD) Modules: With a grid of 12x18 mm.
Lowest Contact Force: Only 2.5 g/Pin for thin PCBs due to a larger pin support area.
Highest Retention Force: Locked pins provide 2,000 g/Pin at 6 bar, achieved through a novel patented clamping mechanism.
ESD-Compliant Support Caps: Prevent component damage.
Automatic Mode: With its own trigger signal or a manual setup mode, freely selectable at any time.
Greatest Lower PCB Clearance: For mounted components up to 27 mm (QTZ Series) or 14 mm (QT Series) with minimal support heights of up to 66 mm.
Non-Interchangeable Male/Female: Pneumatic connections on the compressed air distributor.
3-Year Warranty: On valves and electronics.

Quik-tool™ - Available Systems

Quik-tool systems are available for all stencil printers such as VennTek, EKRA, DEK, ERSA, Speedline MPM, Speedprint, SJ Innotech, Juki GL, Fuji GPX, or Essemtec, always complete with a trigger signal generator (optical sensor). Quik-tool™ systems are also available for all SMD assembly machines such as ASM Siplace, Juki, Fuji, Essemtec, Samsung, Assembleon, Mimot, I-Pulse, Yamaha, or Dima, as well as for AOI systems like Viscom, Koh Young, or Modus.

Quik-tool - The alternative to Grid-Lok, Vacu-Nest, VarioGrid, or brush systems.

--- If you need further assistance or modifications, feel free to ask!

Content:	1,00 pcs

Service. Support. Solutions.

Quick Tool PCB Support Pin System 55 mm 533 mm (21")