Quik-tool - The SMT Standard
for Automatic PCB Support
Whether in stencil printers, SMD placement machines, or in SPI and AOI, the new Quik-tool™ is ready within the shortest time to quickly, safely, and fully support your single-sided or double-sided populated PCBs, and this automatically with each new board. This consistently improves the print results and reliably prevents PCB vibrations. This means higher quality, reliability, repeatability, and an increase in line throughput by minimizing machine downtime.
Quik-tool - Advantages at a Glance
- OPTIFLOW - Automatic air volume regulation without any readjustment by the operator during product change with a varying number of modules
- Standard High Density (HD) modules in a 12x18mm grid
- Lowest contact force for thin PCBs of only 2.5g/pin due to a larger pin support area
- Highest holding force of the locked pins at 2,000g/pin at 6 bar through an innovative, patented clamping system
- ESD-compliant support caps of the pins prevent component damage
- Automatic mode with its own trigger signal or manual setup mode freely selectable at any time
- Largest lower PCB clearance for populated components up to 27mm (QTZ series) or 14mm (QT series) for low support heights of up to 66mm
- Non-interchangeable male/female pneumatic connections at the air distributor
- 3-year warranty on valves and electronics
Quik-tool™ - Available Systems
Quik-tool systems are available for all stencil printers such as VennTek, EKRA, DEK, ERSA, Speedline MPM, Speedprint, SJ Innotech, Juki GL, Fuji GPX, or Essemtec, always complete with a trigger signal generator (optical sensor). Quik-tool™ systems are also available for all SMD placement machines such as ASM Siplace, Juki, Fuji, Essemtec, Samsung, Assembleon, Mimot, I-Pulse, Yamaha, or Dima, as well as for AOI systems like Viscom, Koh Young, or Modus.
Quik-tool - The alternative to Grid-Lok, Vacu-Nest, VarioGrid, or brush systems.
---
If you need any adjustments or further assistance, let me know!
